banner
Blog
home Blog

Blog

  • What is sheet moulding compound?
    • Nov , 12 2020

    The Main Material-SMC  Sheet Moulding Compound is glass reinforced thermoset moulding material with high strength and suitable to be moulded into many products that need to be lightweight but high strength. With excellent bending and corrosion resistance, SMC can be used in very hash weathers and rapidly changing temperature environments. Above all, its weight can be ...

  • Test Standard for Grates
    • Nov , 10 2020

    DIN 19580/EN 1433   The standard DIN 19580, EN1433 offers testing methods for both the complete trench drain and individual grates and accounts for different widths of grates, both proof loading and catastrophic failure. There are three different sizes of test block to test different grates.   DIN 19580 EN1433   Class     Loading Capacity   Typical Uses...

  • The application of SMC in kitchen & bathroom
    • Jul , 06 2018

  • SMC Applications In Electrical & Electronics
    • Jun , 26 2018

    Electronic are the best materials for insulating electrical system components as these have the ability to maintain both physical and electrical properties. The boxes are available in various sizes ,colors and uses. Clients can also avail it in different customized options. ▲▲Cable branch boxes ▲Electr Advantages of products: ▲Excellent Flame Resistance Performance; ▲Excellent Smooth Surface; ▲Exc...

  • The Urban Drainage System
    • Jun , 20 2017

    1.Gully refers to the facilities that the pipeline drainage system to gather surface water , the structure that collect the storm water in the storm water pipe or combined sewer ,the basic components of the rainwater system are composed of water inlet, well bore and branch pipe. Roads, squares, and even the roof’s rain water of the building first through the grate into the gully , then through the...

  • SMC ( Sheet Molding Compound ) Production Process
    • Jun , 02 2017

    SMC is the short form of Sheet Moulding Compound. It is composed of resin , fiberglass and other chemical polymer. This a raw material for mold pressing . Paste reservoir dispenses a measured amount of specified resin paste onto a plastic carrier film. This carrier film passes underneath a chopper which cuts the fibers onto the surface. Once these have drifted through the depth of resin paste, ano...

    a total of

    1

    pages

copyright © 2020 Quanzhou Jieqiang Road Facility Co., Ltd.all rights reserved. powered by dyyseo.com

ipv6 network supported

ipv6 network supported

top

Send A Message

Send A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.